Haake N6 Immersion Circulator with Mounting Bridge

The Haake N6 immersion circulator can be used as an open bath circulator and as a heating circulator. As an open bath circulator, it can be used for applications, such as keeping samples on temperature. As a heating circulator, it can be used for temperature control of closed circuits, such as reactors, heat exchangers and similar objects. This is made possible by the built-in combined pressure and suction pump. The circulator pump motor is protected against thermal overloading. All temperature sensors are permanently monitored according to break or short circuit. The cooling machine is integrated into the general safety circuit. The control of the preselected temperature is carried out automatically via the HAAKE FuzzyStar control.

Specifications: 

Working temperature range: 45-300°C; with tap water cooling: 20-300°C; with other cooling: -60-300°C

Temperature accuracy: ±K: 0.01

Immersion depth from 100 to 195 mm

Width of the bath bridge from 300 to 800 mm

Heater capacity: 3000/±

Total wattage: 3100/± VA

Pump pressure/Flow rate max: 540 mbar / 31 L/min

Pump suction/Flow rate max: 420 mbar / 20 L/min

This circulator includes rear inlet and outlet as well as a mounting bridge plate that is intended for use with a Haake B5 bath. Bath is not included, but may be available at extra cost - please inquire directly.



**SEE LINK TO MANUAL FOR MORE INFORMATION